GB
Electric installation
Cable and plug
Cover must be used.
Fixed installation
Cover must be used.
A Built-in
B On surface
18
ICW/ICS/ICB
ICW/ICS15-20: 3x1,0 mm
ICB8-12: 3x1,0 mm
2
ICW/ICS30: 3x1,5 mm
2
Should only be replaced by a qualified electrician.
The installation, which should be preceded by an omnipolar
switch with a contact separation of at least 3 mm, should only be
wired by a competent electrician and in accordance with the
latest edition of IEE wiring regulations.
2
Cable holder
Terminal block