Sub-Rack - Ganz PixelPro GXi Series Installation Manual

PixelPro GXi Series
⑤ Reset
Reboot the device system or reset the device to its Factory default settings. Refer to the
section "5.3 Reset" and "5.4 Factory Default" for more specific information.
⑥ Inject/Eject Handle
This is used for removing the blade from the rack.

3.2. Sub-rack

The blade is designed for mounting in the sub rack chassis, which provides power and network
connectivity. This blade cannot be used apart from the sub-rack.
Specifications of 19"/4U Sub-Rack Chassis

19" / 4U Aluminum Sub-Rack

Support up to 10 units of 4CH encoder blades (Total 40 channels @ D1)

Hot-swappable encoder blade

Identification of each Sub-Rack and each blade unit ( for easy and quick maintenance)

Temperature Sensor included

Detect power supplier unit operation (Self-diagnosing)

Detect fan unit operation (Self-diagnosing)

Applied device: 4CH encoder blades for H.264 (10 slot expansion supported model)
09-2014-A
19''/4U Sub-Rack Chassis
ZS1-4DB2 Installation Guide
7