Connecting To A Computer; Usb Cable - Transcend Computer Drive User Manual

Connecting to a Computer︱
Micro / Mini
USB Connector
1.
Plug the small end (1) of the USB cable into the StoreJet 25.
2.
Plug BOTH large ends (2) and (3) of the USB cable into an available USB 2.0 or USB 3.0 port
on your desktop or notebook computer.
NOTE: Always plug both large ends of the Y-cable into your computer. If only one
USB port is available, please connect the data transfer end (2) of the Y-cable
(compatibility not guaranteed).

USB Cable

(SJ25M3 / SJ25D3)
3
Power
Connector
USB 2.0 / 3.0
Connector