Connecting To A Computer - Transcend StoreJet 35T3 User Manual

Connecting to a Computer︱
1.
Attach the included 2-pin or 3-pin (country/region dependant) power connector to the USB
Power Adapter by sliding it until it clicks into place.
2.
Connect the Power Adapter cord to the round-shaped DC IN jack on the back of the
StoreJet 35T3 and plug the Power Adapter into your home's power outlet.
3.
Plug the square end (1) of the USB 3.0 cable into the USB port on the StoreJet 35T3.
USB 3.0
Type-B
Connector
StoreJet 35T3
SuperSpeed USB 3.0 Port
4.
Plug the rectangular end (2) of the USB 3.0 cable into an available USB 2.0 or USB 3.0
port on your desktop or notebook computer.
To get the best performance results from your drive, we recommend using the USB 3.0
Note:
interface (currently not supported on Mac computers).
USB 3.0 Cable
USB 2.0 Port
6
USB 2.0 / 3.0
Connector
USB 3.0 Port