Connecting To A Computer; Transferring Content To Storejet Cloud - Transcend StoreJet Cloud User Manual

Connecting to a Computer

Transferring content to StoreJet Cloud

When connected to a computer, StoreJet Cloud acts like a normal hard disk
drive, which means it can store any file but will only stream files supported by
StoreJet Cloud and your device.
1. Plug the small end of the included USB cable into the Mini USB port on the
bottom of StoreJet Cloud, and plug the large end of the cable into an
available USB port on your desktop or notebook computer.
2. StoreJet Cloud can operate in two different modes when connected to a
computer depending on the power button position.
• Power OFF (USB Data Transfer): For transferring files to and from
StoreJet Cloud's internal memory. This mode will charge the internal
battery, however StoreJet Cloud's wireless functions will not be
available.
• Power ON (USB Charge & Stream only): For charging the battery via
your computer. Data transfer from your computer is not available in this
mode, however wireless access is possible.
3. If you are using Windows®, a "Transcend" drive with a newly assigned
drive letter will appear in the My Computer window. For Mac® users, a
"Transcend" drive will appear on your desktop.