Connecting To A Computer - Transcend StoreJet 3.5 User Manual

If you want to use the StoreJet
your computer you need to connect it to a USB port on the computer using the provided USB B-Type to
USB A-Type cable.
1. Plug the small end of the USB B-Type to USB A-Type cable into the USB B-Type port on the
™
StoreJet 3.5.
2. Plug the large end of the cable into an available USB port on your desktop, or notebook computer.
WARNING! Keep in mind that the StoreJet
Power Adapter.
3. Connect the Power Adapter to the StoreJet
to the adapter, then turn on the unit's power switch.

Connecting to a Computer

™
3.5 as an External Hard Disk Drive to upload/download data to, or from
Figure 9. USB B-Type to USB A-Type Cable
Figure 10. Connecting to a Computer
™
3.5 enclosure's power jack and connect the power cable
™
must be powered from the mains using the
11