System Requirements; Safety Precautions; General Use; Backing Up Data - Transcend Computer Drive User Manual

System Requirements︱
Desktop or notebook computer with a working USB port.
One of following Operating Systems:
USB 3.0 Models:

Windows XP

Windows Vista

Windows 7

Linux Kernel 2.6.31+

Mac OS X 10.5+ (only USB 2.0 supported)
Safety Precautions︱
These usage and safety guidelines are IMPORTANT! Please follow them carefully.

General Use

Carefully unpack the contents of the StoreJet 25 package.
During operation, avoid exposing your StoreJet 25 to extreme temperatures above 55℃,
or below 5℃.
Do not drop your StoreJet 25.
Do not allow your StoreJet 25 to come in contact with water or any other liquids.
Do not use a damp/wet cloth to wipe or clean the exterior case.
o Do not store your StoreJet 25 in any of the following environments: Direct
o Next to an air conditioner, electric heater or other heat sources
o In a closed car that is in direct sunlight
o In an area with strong magnetic fields or excessive vibration
If your Windows computer will not boot while StoreJet 25 is connected, please
disconnect the StoreJet 25 to your computer first and connect the StoreJet 25 after
starting Windows. Otherwise, refer to your computer's manual and change the BIOS
settings to instruct the computer to boot from a different device.

Backing up Data

Transcend does NOT take any responsibility for data loss, or damage during
operation. If you decide to store data on your StoreJet 25 we strongly advise that you
regularly backup the data to a computer, or other storage medium.
sunlight
USB 2.0 Models:
2

Windows XP

Windows Vista

Windows 7

Linux Kernel 2.4.2+

Mac OS 9+