Table of Contents
Advertisement
6. Diffuser Installation - for all models - Install the diffuser (item 17) onto the bottom of the outer tube. Insert the shaft
through the small support opening on the diffuser. See figure 9. The small support opening will insert up inside
the inner tube (item 13). With a slight push and turn, thread the diffuser into the outer tube (item 16) turning counter
clockwise (left hand thread).
7. Thread the diffuser (item 17) completely onto the bottom of the outer tube (item 16). Hand tighten. Thread the
impeller onto the shaft by hand. While holding the half coupling with the other hand, turn the impeller clockwise
(right hand thread). See figure 11. Install the diffuser cover (item 19) onto the diffuser turning counter clockwise (left
and thread). Hand Tighten. See Figures 12 & 13.
Figure 11
Figure 9
Figure 12
11
Figure 10
Figure 13
Advertisement
Table of Contents
