Advertisement
Take away the 4 shield sleeves on the rails. Put 3
batteries on the under layer. And lock the blade bolt.
Align the calibration and the battery's hole.
• Connect the cables of lower layer 3 batteries. Please see < Cabinet OD Cable Connection >.
Put the separate board on the 4 stop blocks.
• Connect the cables of lower layer 3 batteries. Please see < Cabinet OD Cable Connection >.
• Connect the
1
• Turn on each battery's power switch.
• Press Master Battery's soft start button. Please see the product menu (capital 4.2 B).
cable terminals to the inverter.
2
3
4
Lock the 6 dowels for these 3 batteries.
Install 3 batteries on the upper layer just like under layer.
And lock the blade bolt.
Master Battery
5
Advertisement
