Table of Contents
Advertisement
LED indications
FIGURE 41 SLX 9540 Switch port-side LEDs
1.
Management port link LED
2.
Management port speed LED
3.
Upper LEDs 0-3 for QSFP ports 49, 51, 53
4.
Lower LEDs 0-3 for QSFP ports 50, 52, 54
5.
SFP Port LEDs for ports 1-48
6.
Status LED
7.
Power LED
LED indications
The SLX 9540 Switch LED indicators are as follows:
•
The Power/Status LEDs are visible to the front panel
•
The Ethernet LEDs are integrated with the RJ45 connector
•
The Power supply LEDs are integrated with the PSU
•
The 10G and 100G Port LEDs are surface mount types. The are visible to the front panel
TABLE 13 SLX 9540 Switch LED
Indications
LED Function/state
Power
Off
Green
Status (bicolor)
Blinking Amber-Green
Amber
Green
1G Ethernet Status
74
Meaning
No power
Valid power. All monitored voltages are nominal
Attention
Fault/ initial state
Board is operational
Possible cause
Some Power rails are dropping below
specification
TBD by SW
This LED shall be lit during the reboot
ExtremeSwitching SLX 9540 Hardware Installation Guide
9036360-00 Rev AB
Advertisement
Table of Contents
