Lifetime 90056 Owner's Manual page 17

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
Press down on the push button on the Height Spacer (BME) (or the Rear,
2.2
Middle Leg (BMB) if step 2.2 was not performed) and insert the swaged
button snaps into the hole indicated.
BMC
Snap push button
into hole
!
Note: Repeat steps 2.1 through 2.3 to assemble the other Rear Leg Assembly.
Press down on
push button
BME
17
Rear, Top Leg (BMC) until the push
BMB