Related Manuals for Lifetime 90046
Summary of Contents for Lifetime 90046
- Page 1 MODEL N° 90046 OWNER’S MANUAL Keep this Product ID Number and use when contacting Customer Service:...
- Page 2 Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your personal data to other third parties, or allow them to use your personal data for their own purposes.
-
Page 3: Parts List
PARTS LIST Item Description Adjustable Goal and Net Assembly Storage Straps Net Straps Stakes Stake Bag PARTS IDENTIFIER Parts not shown to scale BZE (x1) Adjustable Goal and Net Assembly BZG (x12)* Net Straps BZF (x2) Storage Straps BZH (x5) BZI (x1) Stakes Stake Bag... -
Page 4: Goal Setup
GOAL SETUP Step Remove the Storage Straps (BZF) from the Adjustable Goal and Net Assembly (BZE). Note: The Net should remain attached to the Assembly. It has been omitted from these images in order to clarify parts handled during setup. Note: Do not carry the Adjustable Goal and Net Assembly by the Storage Straps. - Page 5 Step Press in the push buttons on the legs on both sides of the Goal. Extend the legs by sliding them out until the push buttons snap into the last hole on the leg. Push Buttons Push Buttons Step Raise the front of the Goal to the highest setting by pressing the push buttons in and sliding the legs until the push buttons snap into the highest hole on the leg.
- Page 6 Step Unfold the back of the Goal and Net Assembly (BZE) until the unit forms a right angle as pictured. Lock the legs in place using the pins on the two corner brackets of the Assembly as shown. Locking Pin on Corner Bracket Step Slide the Stakes (BZH) onto the metal tubes and push the ends into the...
- Page 7 GOAL ADJUSTMENT Step At full size, the Soccer Goal will measure 7’ wide and 5’ tall. To adjust 2.1a the size to 6’ x 4’, press the push buttons on the top and rear assembly legs and slide the goal to the middle hole on each tube. Press the push buttons on the side legs and slide the goal to the middle holes on each tube.
- Page 8 Step Use four Net Straps (BZG) to tighten the Net. Place the Net Straps on the metal tubing of the Adjustable Goal and Net Assembly (BZE) in the locations shown.
- Page 9 Step Use the remaining two Net Straps (BZG) to gather the excess netting. These straps will not be placed on the metal tubing, but will gather the net to itself. The illustration below shows suggested placement points for the Net Straps.
- Page 10 NOTES...
- Page 11 ENHANCE YOUR LIFETIME PURCHASE BY ADDING ® ACCESSORIES OR OTHER GREAT PRODUCTS: To purchase accessories or other Lifetime Products, visit us at: www.lifetime.com Or call: 1-800-424-3865...
-
Page 12: Warranty Information
THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE. 1. Lifetime sporting goods are warranted to the original purchaser to be free from defects in material or workmanship for a period of ninety days from the date of original retail purchase. The word “defects”...