Bego Nautilus CC plus Manual page 9

Repairs
Repairs must only be carried out by BEGO
customer service personnel or by persons
authorized by the BEGO customer service
department.
Metallic housings must be properly grounded to
prevent them from carrying electric current.
If not properly grounded, the housing may become
live in case of a damage inside of the device and
thus may pose a danger to life. Only trained and
qualified electricians must be allowed to open the
device as exposed, conductive parts are subject to
mandatory inspections for the absence of voltage
after repairs (Germany: Inspection in accordance
with DIN VDE 0701-1)!
Only BEGO spare and wear part must be used.
Installation
The device is subject to the provisions of protection
class I and must only be connected to properly
earthed power sources (outlet sockets with earth
contact).
When laying cables and hoses, make sure that they
are protected from hot components (e.g. moulds).
The cooling water temperature must never drop
below 10°C (50°F). Otherwise, condensation water
may drip on the hot moulds and vaporize explo-
sively.
Danger of burns when draining the cooling water!
The water can reach temperatures up to 70° C if the
device was used for casting beforehand.
English ⋅ Nautilus
Maintenance of safety-relevant compo-
nents
The device has been designed for a service life of
10 years from the date of manufacture. No liability is
accepted for damage arising from the operation of
the device after this period.
Safety-relevant components must be checked
regularly and replaced as required. This work must
only be carried out by BEGO customer service
personnel or by representatives that have been
authorized by the BEGO customer service
department. For that purpose, regular maintenance,
including annual inspections and an inspection after
five years, carried out by personnel authorized by
BEGO is recommended.
®
CC plus ⋅ Nautilus
®
T
en
9