Nautilus ® Cc Plus; Device Description - Bego Nautilus CC plus Manual

English ⋅ Nautilus
en

Device description

Overview
44
®
CC plus
®
NAUTILUS CC plus (CC = Cast Control) is a
compact table device for vacuum casting with
induction heating for use in dental laboratories.
Sophisticated software and non-contact temper-
ature measurement with the help of a so-called
multichannel pyrometer enable automatic casting
and at the same time optimal, reproducible casting
results.
1 Fiber optic cable to the pyrometer
2 Protective glass
3 Touchscreen
4 Main switch
5 Mould door
6 Crucible door
The following functions can be called up on the
touchscreen after the device has been switched on:
Automatic casting
In automatic mode, casting is carried out automati-
cally at the optimal casting moment without any
action on the part of the operator. Only the alloy
program location needs to be called up, which can
be found in the program tables.
In automatic mode it is also possible to intervene
manually, if desired, for example to trigger casting
before the machine would do it.
Manual casting
In manual mode, the alloy is casted at the push of a
button. With the aid of the pyrometer, the temper-
ature is also measured in manual mode and
additionally alerts the operator with acoustic signals
that the proper casting temperature has been
reached.
Manual casting generally only serves to set up a
program for a non-BEGO alloy (with pyrometer, see
page 30) or is used as a back-up/ emergency
casting option in the event that the pyrometer is
defective.