DPR, DPR/E01
Xmit Menu
Selecting Frequency
The setup screen for frequency selection offers two
ways to browse the available frequencies.
Freq.
Xmit...
Freq.
TxPower
Rf On?
Press the MENU/SEL button to select each field. Use
the
and
arrow buttons to adjust the frequency.
Each field will step through the available frequencies in
a different increment.
Setting Transmitter Output Power
The output power can be set to 25 mW or 50 mW.
Xmit...
TxPower
Freq.
TxPower
Rf On?
Turning Rf Output On
It's best to set frequency and other settings in the
standby mode (Rf off) so that no audio will enter the
sound system or recorder during adjustment. Use this
menu item to turn the Rf carrier on and off.
Xmit...
Rf On?
Freq.
TxPower
Rf On?
NOTE: See previous section, Turning Power ON
and OFF for instructions on turning transmitter
on with the Rf carrier disabled (Standby Mode).
SDCard Menu
Record or Stop
Begins recording or stops recording. (See Recorder
Operating Instructions.)
SDCard...
SDCard...
Record
Stop
Files
Files
Takes
Takes
14
Freq.
494.500
494.500
25 mW
50 mW
Yes
No
Choosing Files for Replay
SDCard...
Files
0004B
Record
0003B
0002C
Files
0001C
0002B
Takes
0001B
Choosing Takes for Replay
Use UP and DOWN arrows to toggle and MENU/SEL
to play back.
Takes
SDCard...
S01
Record
S01
Files
S02
S03
Takes
Setting Scene and Take Number
Use UP and DOWN arrows to advance Scene and
Take and MENU/SEL to toggle. Press the BACK but-
ton to return to menu.
Sc&Take
SDCard...
Files
Scene
Takes
Take
Sc&Take
Formatting microSDHC Memory Card
Formats the microSDHC memory card.
WARNING: This function erases any content
on the microSDHC memory card.
SDCard...
For mat?
For mat
(erases)
Naming
SD Info
Recorded File Naming
Choose to name the recorded files by the sequence
number, by the clock time or by scene and take.
SDCard...
Naming
Seq #
For mat
Clock
Naming
Sc&Take
SD Info
Select recorded
files on
microSDHC
memory card.
T001
T002
T001
T001
1
5
No
Yes
LECTROSONICS, INC.
Need help?
Do you have a question about the DPR and is the answer not in the manual?
Questions and answers