•
On a computer with a Windows operating system, you can use HyperTerminal or
install another terminal emulator such as Tera Term.
•
On a computer with a MAC operating system, you can use ZTerm.
•
On a UNIX workstation, you can use a terminal emulator such as TIP.
4. If you attach a computer or workstation, configure the terminal emulation program to use the
following settings:
•
Baud rate. 115,200 bps
•
Data bits. 8
•
Parity. None
•
Stop bit. 1
•
Flow control. None
After you connect a console to the switch, you must configure the switch. For information
about configuring the switch, visit downloadcenter.netgear.com to download the manual.
For information about configuring the switch through its web management interface, visit
downloadcenter.netgear.com to see and download the software administration guide and
the user manual.
Installation
Managed Switch Series M4200
30
Hardware Installation Guide