Matsui MUF48W19E Instruction Manual page 26

INSTALLATION
2. Undo the screws. Then remove the hinge
bracket.
GB
NO
3. Remove the top left screw cover.
SE
FI
DK
CZ
SK
4. Move the core cover from left side to
right side. And then lift the door and
place it on a padded surface to prevent it
from scratching.
5. Remove the screws and bottom hinge.
Then remove the adjustable feet from
both side.
• Do not lay the unit flat as this may damage the coolant system.
• During door reversal, when swapping the position of the bottom hinge or adjusting
the levelling feet, tilt the unit. Do not lay the unit flat.
26
unscrew
Unscrew