Remote Control; Front Panel Controls; Dimming The Display; Input Selector - Pro-Ject Audio Systems Box Design Pre Box DS Instructions For Use

Remote control

ON/OFF
CH+
VOL+
VOL-
CH-

Front panel controls

Pre Box DS
To switch on from standby or to standby
turns the unit on or back into standby (press and hold to switch into standby mode). The display shows
STANDBY when the unit is in standby.
While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next
power on.

Dimming the display

Press and hold the buttons

Input selector

Pressing the buttons and
display.

Volume

Adjust the volume (63 steps) to the desired level using the buttons
the display. -63dB indicates min., 00dB max..

Mute

While the unit is powered on,
1
ON/OFF
short press turns the unit on, long press takes it back into standby.
Powered on, a short press activates and deactivates mute
0
0 _
+
VOL
VOL
and
_ 0
0
+
CH
CH
and
-
+
and will change the display brightness - full, half and one third.
repeatedly selects the inputs 1 - 4 in turns. The selected input will be shown in the
0
ON/OFF
activates and deactivates mute
© Audio Trade GmbH · Pro-Ject Pre Box DS · Revision 2013.1.15
adjust the sound volume
select the inputs
and . The volume level will be shown in
.
3