Mains Power Connection; Remote Control; Front Panel Controls; To Switch On From Standby Or To Standby - Pro-Ject Audio Systems Pro-Ject MaiA DS Instructions For Use Manual

Mains power connection

Connect the low voltage plug from the power supply to the 24V DC Power socket before connecting the
power supply to the mains.

Remote control

Front panel controls

To switch on from standby or to standby

The push button on the left side of the front panel turns the unit on or back into standby. The blue LED above
the stand-by push button shows that the unit is switched on. Mute is active when LED is blinking.

Input selector

After the unit is powered on, pressing the buttons
input.
Volume
Adjust the volume to the desired level, using the large knob on the front panel.
Connecting a headphone
Connect the headphones to the ¼" (6,3mm ) jack socket on the front of the unit.
4
© Pro-Ject Audio Systems · Pro-Ject MaiA DS · Revision 2016.2.1
1
ON/OFF
turns the unit on or back into standby
0 0
VOL VOL +
and adjust the sound volume
0
1 9
CH
- and
Blank button confirms Bluetooth pairing
Activate/deactivate mute
◄ ►
and
0
CH +
select the inputs
next to the LEDs inputs indicators select desired