Advertisement
Pairing with Android devices
Open Settings and turn on BT. Start a Scan for BT devices. Searched devices will show up. Tap on "MaiA S3"
and confirm presented pairing code on your Android device. When the connection was successful, the LED of
Input 8 lights up continuously. Now you can play music from your Android device over BT to MaiA S3.
BT pairing with Apple devices
Tap on Settings and turn on BT. Your device will automatically start searching for available devices. Tap on
"MaiA S3" and confirm the connection. When the connection was successful, the LED of Input 8 lights up
continuously.
BT pairing with Windows smartphones
Open Settings and turn on BT. A scan for available devices starts automatically. Searched devices will show
up. Tap on "MaiA S3" and confirm presented pairing code on your Windows device. When the connection was
successful, the LED of Input 8 lights up continuously. Now you can play music from your Windows device over
BT to MaiA S3.
MaiA S3 can store up to 8 BT devices. If the memory is full, new connections will automatically replace
the oldest connection. A new connection is only possible if the LED of BT input is blinking slowly (it
indicates that no device is connected). You can reset & clear the BT module by holding the
and then turn the unit on. The LED 8 will quickly flash & the device will then turn on after the reset is
completed.
Remote control
Replacing batteries
Proceed as follows:
•
Unlock and slide open the battery case cover
•
Replace the battery.
Make sure the battery is the right way round !
•
Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.
4
© Pro-Ject Audio Systems · MaiA S3 · Revision 2022.01.03
ON/OFF turns the unit on/off (long press), mute (short)
VOL- turn the volume down
VOL+ turn the volume up
CH- select the input down
CH+ select the input up
VOL+ and CH+ confirm BT pairing
VOL- and CH- cancel BT pairing
◄
button
Advertisement
