Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Pro-Ject Audio Systems Xpression II
Summary of Contents for Pro-Ject Audio Systems Xpression II
- Page 1 INSTRUCTIONS FOR USE Pro-Ject Xpression II...
- Page 2 © Audio Trade GmbH · Pro-Ject Xpression II · Revision 20.2.06/1.5.06...
- Page 3 Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical drawings above. Separately packed items are marked with an asterisk *. © Audio Trade GmbH · Pro-Ject Xpression II · Revision 20.2.06/1.5.06...
- Page 4 (L -) The full sound quality of the PRO-JECT Xpression II can only be achieved if the cartridge is correctly adjusted. Particular tools like the PRO-JECT alignment tool are required to accomplish this job properly. If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your PRO-JECT dealer to accomplish this task for you.
-
Page 5: Connection To The Amplifier
(17). Connection to the amplifier The PRO-JECT Xpression II has gold plated female RCA phono sockets (14) so you can substitute the interconnect cables supplied with those of your choice for connection to the amplifier if you wish. Your dealer can advise you on alternative cables. -
Page 6: Switching On And Off
16V/500mA AC, suitable for your country's mains supply Dimensions (W x H x D) 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm Weight 6,3kg © Audio Trade GmbH · Pro-Ject Xpression II · Revision 20.2.06/1.5.06... -
Page 7: Potential Incorrect Use And Fault Conditions
This guide was produced by: Audio Trade GmbH changes to the technical specification without prior Copyright © 2005. All rights reserved. notice as deemed necessary to uphold the ongoing process of technical development. © Audio Trade GmbH · Pro-Ject Xpression II · Revision 20.2.06/1.5.06... - Page 8 Accessories 2 motor transport screws (marked red) Tomearm transport look Tonearm counterweight Power supply Platter © Audio Trade GmbH · Pro-Ject Xpression II · Revision 20.2.06/1.5.06...
- Page 9 Phono pre-amplifier Phono Box II Amplification and RIAA equalisation for MM and MC cartridges Dual-Mono circuitry for improved channel separation Available in silver or black finish Phono pre-amplifier Phono Box SE Amplification and RIAA equalisation for MM and MC cartridges Selectable impedance for MC cartridges Subsonic filter Dual-Mono circuitry for improved channel separation...
Need help?
Do you have a question about the Xpression II and is the answer not in the manual?
Questions and answers