Remote Control; Front Panel Controls; Stand-By; Input Selector - Pro-Ject Audio Systems Stereo Box Instructions For Use

Remote control

ON/OFF
CH+
VOL+
VOL-
CH-

Front panel controls

1 2
Input
Select
Power

Stand-By

The switch marked Power (press and hold to switch into standby mode) on the front panel turns the unit on or
back into standby. The blue LED on the front panel shows that the unit is powered on.

Input selector

After the unit is powered on, pressing the Power button selects the In 1 and In 2 inputs in turn. If Input 1 is
selected, the LED over the Input Select button lights up green. If Input 2 is selected, it lights up red.
If the optional input expander Pro-Ject Switch Box is connected, Input Select will also select the additional
inputs provided by the Switch Box.

Volume

Adjust the volume to the desired level using the large knob marked Volume on the front panel.
1
ON/OFF
turns the unit on or back into standby.
The blue LED on the front panel shows that the unit is powered on.
0
_
0
VOL
VOL
and
0
0 _
CH
CH
and
Volume
Stereo Box
© Audio Trade GmbH · Pro-Ject Pre Box · Revision 1.6.10/1.8.10
+
adjust the sound volume
+
select the inputs
3