Dsd Playback; Remote Control - Pro-Ject Audio Systems BOX-DESIGN MaiA DS2 Instructions For Use Manual

Hide thumbs Also See for BOX-DESIGN MaiA DS2:

Table of Contents

24Bit/192kHz playback with Windows® operating systems

* For Windows

operating systems a 24Bit/192kHzUSB driver (supplied on CD) has to be installed. Insert the

included CD into the drive of your PC and follow the instructions.

After installing the driver, some settings have to be checked/done.

For example - Windows 7

→ Control Panel → Hardware and Sound →Sound→ Playback:

select Speaker/MaiA DS2 USB 2.0 Audio Out

→ Properties → Supported formats: make sure nothing is assigned

→ Level → Sound: setting must be 100

→ Enhancements: disable all enhancements → Advanced → Default Format: set to studio quality 24/192

DSD playback

Playback of DSD files (.dff, .dsf) is possible over USB. Player capable of playing DSD files is required in your

computer. Setup guide is available on our website http://www.box-designs.com

On the front panel are LED´s which indicate sample rate of DSD playback.

Front panel controls

operating system:

ON/OFF

turns the unit on or back into standby

VOL

and

Blank button confirms BT pairing

Activate/deactivate mute

adjust the sound volume

and

select the inputs

Table of Contents

Do you have a question about the BOX-DESIGN MaiA DS2 and is the answer not in the manual?

Box design maia ds2