Page 2
The pushbutton on the front panel of the unit alternately turns the power on or returns it to standby mode. The blue LED on the front panel shows that the unit is powered on. If a trigger signal is present Stereo Box DS3 can’t be switched off by the pushbutton.
Page 3
2. Remote power on - triggers Stereo Box DS3 can be switched on via other Box Design components when a 12V trigger voltage is present at the 2.5mm socket marked Trigger Input. Special power-on cables (polarity ) in diverse lengths are available as accessories.
Page 4
Open Settings and turn on BLUETOOTH®. Start a Scan for BLUETOOTH® devices. Searched devices will show up. Tap on "Stereo Box DS3" and confirm presented pairing code on your Android device. When the connection was successful, the LED of Input 8 lights up continuously. Now you can play music from your Android device over BLUETOOTH®...
Need help?
Do you have a question about the Stereo Box DS3 and is the answer not in the manual?
Questions and answers