Table of Contents
Advertisement
Basic operation
Power on your projector
1. Connect all external equipment to your projector
(e.g. computer or camera) before powering it
on.
2. Connect AC power cord of your projector to an
AC power socket. The Power indicator turns on
in red.
3. Press the Power button on the top control panel
or the remote controller.
The Power indicator lights in green and the
cooling fan starts running.
4. If your projector is setting as password protect-
ed, the password dialog box displays. Enter
your password as instructed below.
Note:
● In case the "Logo Select" option is set
to OFF, then no welcome image will
display in screen.
● You can do nothing but powering off
your projector during the welcome
image is displaying.
Enter Passcode
Press
button to select a number, press
to enter it and move the cursor. The number you typed
is displayed as " ". To edit number you have entered,
press
button to move the cursor to the number you
want to change, press
one.
Repeat this step to type in a 3-digit number.
Move the cursor to SET after you have typed the 3-digit
OK
number. Press the
button and now you are ready
to use your projector.
If the password is invalid, the password displayed as
"
" will be in red. Please try again with a valid one.
You Passcode code is a 3-digit number. To find out more about protecting your projec-
!
tor with a Passcode, please refer to the Passcode Lock function in the Setup menu on
Page 63
for details.
Precautions on Passcode operation
You cannot operate a Passcode protected projector without correct Passcode. Please
set up a new Passcode and keep your operation manual in safe place. In case the
Passcode is lost or forgotten, please refer to the To Cancel the Passcode on
button
button to select the correct
35
Passcode
0
1
2
3
4
5
Set
Cancel
：Input Passcode
：----
OK
Passcode
0
1
2
3
4
5
*
*
Set
Cancel
：Move
：Select
OK
Move the cursor to Set button,then
press the OK button.
6
7
8
9
：----
MENU
6
7
8
9
：Reset
MENU
Page
63.
Advertisement
Table of Contents
