Basic Operation Method; Turning On Power - Canon MP250 User Manual

Basic Operation Method

Turning On Power

1.
Connect power adapter to the power input terminal.
2.
Turn on the device by turning on the battery switch.
The device will switch to a standby mode.
Projector
power button
3.
Hold the power button of projector to turn on the projector.
The system power is applied and the system booting screen is displayed.
10
MP250 User Guide
Note
• The battery may explode or the product may break down if battery is charged
with a non-certified charger.
• Warranty is not applied for the damages caused by improper method of use.
Note
• To use the projector, turn on both battery switch and the power button of
projector.
• If only battery switch is turned on, this can be used only for charging the battery.
• When you are not using the projector, turn OFF both battery switch and the
power button of projector.
Battery switch