Network control
[System Status] page
Versions: Displays the firmware version of the projector.
①
LAN Status: Displays the LAN. connection status .
②
[General Setup] page
Enter old password: Enter the password for the configuration.
①
Enter new password: Enter a new password.
②
Confirm new password: Re-enter the new password to confirm.
③
Power & Source: Update settings.
④
Power: Switch on the power of the projector on / off.
⑤
Source select: Switch the input source of the projector.
⑥
[Picture Setup] page
Brightness: Adjust the brightness of the projected image.
①
Contrast: Adjust the contrast of the projected image.
②
Sharpness: Adjust the sharpness of the projected image.
③
Color level: Adjusts color Color level of the projected image.
④
Color balance: Adjusts the Color balance of the projected image.
⑤
Color Temperature: Adjust the color temperature of the projected image.
⑥
①
②
③
④
⑤
⑥
73
①
②
①
②
③
④
⑤
⑥