Basic Operation; Turning On The Projector - Canon LV-X4E Owner's Manual

Hide thumbs Also See for LV-X4E:
Table of Contents

Advertisement

Basic Operation

Turning On the Projector

1
Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.
2
Connect the projector's AC power cord into an AC outlet.
The POWER indicator blinks red in a moment and lights red.
3
Press the POWER button on the top control or on the
remote control unit. The POWER indicator turns green
lighting and the cooling fans start to operate. The
preparation display appears on the screen and the count
down starts.
4
After the count-down, the image level that was selected last
and the Lamp mode status icon (see page 44) appear on the
screen.
Note:
If the projector is locked with a PIN code, PIN code Input Dialog Box will appear.
Enter the PIN code as instructed below.
Enter a PIN code
Select a number by pressing the Point 7 8 button and fix the number with
the SET button. The number will change to " ". If you fixed a wrong
number, move the pointer to "Set" or "Clear" once by pressing the Point d d
button, then return to "PIN code". Enter the correct number again.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer will automatically move to
"Set". Press the SET button so that you can start to operate the projector.
If you entered a wrong PIN code, "PIN code" and the number (
turn red and disappear. Enter a correct PIN code all over again.
What is PIN code?
PIN code is a security code using Personal Identification Number that
allows the person who knows it to operate the projector. Setting PIN code
prevents others except the specific users from operating the projector.
A PIN code consists of a four-digit number. Refer to PIN code lock
function in Setting on page 45 and 46 for locking operation of the projector
with your PIN code.
20
16
The preparation display disappears after 30 seconds.
Selected Image Level and Lamp Mode
(See page 44 for Lamp mode.)
PIN code Input Dialog Box
) will
After the OK icon
disappears, you can
operate the projector.
Lamp mode
Pointer

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lv-x4Lv-x4u

Table of Contents