Canon LH-WU350UST User Manual page 50

Display
Select the computer system manually
1 Press the MENU button on remote controller or on
the top control panel and the OSD displays. Press
button to point to the Input icon, press
button or OK button and the Input menu displays.
2 Press button to select System Signal Format,
then press OK button.
3 Press button to select required system signal
format, then press OK button to confirm your
selection.
Video
Select this function to set resolution of input signal is
compatible with the PC.
Set Video input signal color system.
1) Press button to select [System ] menu.
2) Press <OK> button.
3) Press button to select wanted system.
RGB input signal
1024x768 60HZ, etc:display the compatible name
input signal name.
Auto: When projector has no compatible input
signal with one from connected PC ,the PC
can adjust automatically to run and Auto
appear on the system. If the image is not
projected out correctly, please adjust it to
match your computer manually.
- - - -: No signal input come from PC. Please check
the connections.
Video input signal
Auto: When projector select the input signal color
system automatically. Set [PAL-M] or [PAL-N]
manually .
[PAL]/[SECAM]/[NTSC]/[NTSC4.43]/[PAL-M]/
[PAL-N]/[PAL60]:When projector can not display
images correctly in [Auto], please
set input signal color system
manually.
Note:
Your projector may save data
generated by the Auto PC Adjust.
function.
Computer system menu
Display
Video displays in the
PC system menu.
50
System
AUTO
PAL
SECAM
NTSC
NTSC4.43
PAL.M
PAL.N
PAL60