Test Elevated Drive Speed - Skyjack SJIII 4740 Operating Manual

Section 2 - Familiarization
Platform Control Console
Lift/Drive/Steer Enable
Trigger Switch
Inclined Drive/Level Drive
Switch
5. Repeat the steps above with block placed
under battery tray.
Result: MEWP should not move forward
or backward.
•

Test Elevated Drive Speed

Be aware of overhead obstructions
or other possible hazards around the
MEWP when lifting.
1. Ensure path of intended motion is clear.
2. Raise the platform until approximately a
height of 7 feet (2 meters) is reached and
attempt to drive forward or reverse.
Result: MEWP should move slower than
when it was in stowed position.
SJIII 4740
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Lift/Off/Drive Switch
WARNING
contained in this operating manual and on the aerial platform.
Rocker Switch
Controller
Emergency Stop Button/
Operation Light
Horn Pushbutton
Function Tests
Page 31