Panasonic ST4 Series Instruction Manual page 3

Thank you very much for purchasing Panasonic Electric Works SUNX's Safety
Beam Sensor, ST4 series (hereinafter called "this device").
Please read this instruction manual carefully and thoroughly for the correct
and optimum use of this product.
Kindly keep this manual in a convenient place for quick reference.
This device is a safety beam sensor for protecting a person from dangerous
parts of a machine which can cause injury or accident.
This manual has been written for the following personnel who have undergone
suitable training and have knowledge of safety beam sensors, as well as,
safety systems and standards.
● who are responsible for the introduction of this device
● who design the system using this device
● who install and connect this device
● who manage and operate a plant using this device
Notes
1) All the contents of this instruction manual are the copyright of the pub-
lishers, and may not be reproduced (even extracts) in any form by any
electronic or mechanical means (including photocopying, recording, or
information storage and retrieval) without permission in writing from the
publisher.
2) The contents of this instruction manual may be changed without prior
notice for further improvement of the product.
3) Though we have carefully drawn up the contents of this instruction
manual, if there are any aspects that are not clear, or any error that you
may notice, please contact our local Panasonic Electric Works SUNX
office of the nearest distributor.
4) English and Japanese version of this instruction manuals are original.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016 3