Panasonic PAW-160MAH2L Installation Instructions Manual page 53

To connect the remote controller and subsequently change the relevant settings, complete the
following steps:
1. Connect the maintenance remote controller to the blue 3-pole CN-RC plug on the main PCB
of the PACi outdoor unit using the optional special service wiring CV6242785082 or PAW-
MRC (as an alternative, you can also use any unused indoor unit connector (E3, PNL, FS,
RC) or temporarily disconnect one of those wires from the AHU kit itself).
Depending on the PACi outdoor unit model, the CN-RC plug can be found at one of the
following positions:
a.
Outdoor unit maintenance
remote controller
Optional special service
wiring (CV6242785082 or
PAW-MRC)
Standard wired
remote controller
CZ-RTC4
b.
Outdoor unit maintenance
remote controller
Optional special service
wiring (CV6242785082 or
PAW-MRC)
Standard wired
remote controller
CZ-RTC4
c.
Outdoor unit maintenance
remote controller
Optional special service
wiring (CV6242785082 or
PAW-MRC)
Standard wired
remote controller
CZ-RTC4
CN-RC
CN-RC
CN-RC
Installation
Standard – R410A Elite – R410A
U-60PEY2E5 U-36PE2E5A
U-71PEY2E5 U-50PE2E5A
U-60PE2E5A
Standard – R32
U-60PZ2E5 Elite – R32
U-71PZ2E5 U-36PZH2E5
U-50PZH2E5
U-60PZH2E5
Standard – R410A Elite – R410A
U-100PEY1E5 U-60PE1E5A
U-125PEY1E5 U-71PE1E5A
U-100PEY1E8 U-100PE1E5A
U-125PEY1E8 U-125PE1E5A
U-140PEY1E8 U-140PE1E5A
U-71PE1E8A
U-100PE1E8A
U-125PE1E8A
U-140PE1E8A
Elite – R410A
U-200PE2E8A
U-250PE2E8A
Elite – R32
U-200PZH2E8
U-250PZH2E8
51