Control; Remote Controller; Thermostat; Control And Display Elements - Panasonic PAW-160MAH2L Installation Instructions Manual

7

Control

7.1

Remote controller

The standard Panasonic wired remote controller CZ-RTC2 / CZ-RTC4 is an integral part of the
AHU Kit. All control and setting operations for the ECOi, ECO G or PACi system can be per-
formed on this remote controller.
i
Important
The relevant control operations are described in the "Operating Instructions" manual for the
CZ-RTC2 / CZ-RTC4 remote controller. It is supplied with the AHU Kit or can be downloaded
from the "Service" section at www.panasonicproclub.com.
7.2

Thermostat

The advanced version of the AHU Kit features a thermostat (temperature controller), which can
optionally be set and parametrized separately if using the controller is required.
i
Important
The thermostat is not included in the „light" or "medium" version of the AHU Kit.

7.2.1 Control and display elements

1 Display "PV": Process value
2 Display "SV": Set value
3 Button "Down"
4 Button "Up"
5 Button "Set"

7.2.2 Operation

Status messages
After the thermostat has been switched on, the PV and SV displays jointly show a set sequence
of three status messages before they change to the normal view where the current process
8
7
6
5
6
7
8
1
2
3
4
Button "Left"
LED "Alarm"
(ON when Auto-Tuning is active)
LED "Out"
(ON when Process Value is lower than Set Value)
Control
85