Inspection - Honeywell Miller AirCore Series User Instruction Manual Supplement

User Instruction Manual Supplement - English
Fig. 11a, 11b & 11c
Use of Tool Loops
Tool loops are designed for the convenient at-
tachment of light tools and tool bags (Fig. 10).
Tools must have a means to connect to the loop
and should never hang freely without a closed
connection.
Fig. 10
Tool loops are removable or replaceable, and
additional tool loops may be added. Simply
remove belt, change or add tool loops, and
reattach belt to harness.
WARNING: Belt must be properly re-
attached to harness, ensuring that all
points of attachment have been utilized
correctly (see Fig. 11a, 11b & 11c). Belt
must go through side D-rings, mating
buckles, and back web loop as shown.
Storage of Connecting
Device when Not in Use
Fig. 12
Fig. 13
Attach connecting device to
either the pull-free Velcro®
keeper (Fig. 12) or the pull-
free lanyard ring (Fig. 13).
Do not attach an unused
connecting device to any
other components of the
harness.

6.0 Inspection

Inspect harness, including Bos'n chair, according to the Miller Harness and Body Belts
instruction manual. absence of or alteration to any elements affecting
9