Speed Dial - Toshiba Strata DK 2000-series User Manual

Features

Speed Dial

3. Speak in a normal
voice level toward the
telephone.
4. Press
disconnect the call.
➤
To answer an incoming call using speakerphone
1. With the handset on-
hook, press the
or [DN] with the
flashing LED.
2. Speak at a normal
voice level toward the
telephone.
3. Press
disconnect the call.
Speed Dial
Speed Dial enables you to call a telephone number with a brief access code. There are
two types of Speed Dial numbers:
o Station – assigned by individual station users to their own station and can only be
dialed from the station that assigns it.
System – only assigned from attendant consoles or a designated station (typically
o
the System Administrator's station), and can be used by other stations. (See
System Administrator User Guide for storing instructions.)
Important!
70
Note
to
The Line or [DN] LED flashes green (in-use) and you
are connected to the call.
to
If you do not perform the following procedures within a specified time
(set in system programming for either one or three minutes) when
storing speed dial numbers, the operation times out and your telephone
returns to idle mode.
Your button must be set to be ON at the
start of a call in system programming. If not,
you must press the
Strata DK Digital Telephone 6/00
button before talking.