Remote Destination Change - Toshiba Strata DK 2000-series User Manual

Remote Destination Change

If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
➤
To change the destination number
1. Call into the DK
system over a CO line
programmed for the
DISA feature.
2. After you receive dial
tone, press
dial your [PDN].
3. Enter the Remote Call
Forward-External
security code.
Strata DK Digital Telephone 6/00
You hear ringback tone signal, then internal dial tone
for 10 seconds.
Try again if you hear busy tone.
See the System Administrator for DISA
Note
telephone numbers.
You hear a confirmation tone.
then
If a number is not dialed, the system automatically
makes the DISA CO line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
You hear a confirmation tone. See the System
Administrator for the security code which is assigned
to your telephone in system programming.
Features
Call Forward
35