Table of Contents
Advertisement
13-10. Replacing the Fuse of the AC Input Unit
(Note)
Before starting the fuse replacement work, always turn OFF the main power of
the machine completely.
If the fuse of the AC input unit is blown up, follow the steps below to replace the fuse.
Fuse part No.: HF0013005P0
(Time-lag fuse, 500mA. Three fuses are supplied with the machine as accessory parts.)
<Procedure>
(1) Open the bottom cover on the rear at the center
(2) The fuse is mounted at the front left portion of the AC input unit (Figure 13-10-2). Replace
this fuse.
Figure 13-10-1 Rear View of Machine
Figure 13-10-2 Side View of AC
FX-3R Maintenance Guide
AC input unit
Fuse
Transformer
13-58
.
Figure 13-10-3 Top View of AC
Input Unit_L
Rev. 1.00
Advertisement
Table of Contents
