Automatic Hold - Toshiba CT User Manual

Features

Automatic Hold

4. Answer within three
rings to prevent the
callback from being
cancelled.
5. If you were
attempting to make an
outside call and did
not use LCR, you
must now redial the
telephone number.
To cancel ACB (to busy or DND station)
Press
Automatic Hold
Automatic Hold enables you to automatically place a call on hold by pressing another outside
or a [DN] button—there is no need to press
without having to press
existing calls drop if you do not press
To use Automatic Hold
While on a call, press another
the accessed line flashes (in-use). The first call is put on hold and the LED flashes (on-
hold).
To switch between calls
Press
The LED of the Line or [DN] placed on hold flashes (on-hold).
22
After you answer, you hear a single tone, and the LED flashes
green (in-use).
If you hear a busy tone after answering a callback, the called
party is already on another call or the line has already been
seized or has received an incoming call. Your request is not
cancelled. You will be called again the next time a line
becomes idle.
If the original call was made using LCR, the telephone number
is automatically dialed.
or [DN] +
. Your telephone must be programmed for this feature, otherwise
or [DN] of the held call. The LED of the line just accessed flashes (in-use).
.
. You can also switch between calls
before answering or making another call.
or [DN] to receive/originate a new call. The LED of
Strata DK Digital Telephone 5/99