Hold; Exclusive Hold; Automatic Hold; Consultation Hold - Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual

Hold

Hold
1. To place a call on hold, press
green while appearances of the line at other stations flash red.
To return to the held call, press the held
If you do not return to the held call within a specified time, it rings back to your telephone.
The call remains camped-on to your station indefinitely.
If the held party hangs up, the call is released.
2. Repeat Step 1 to place additional lines on hold.
See the Call Pickup section to pick up a call on hold from another extension.
Note

Exclusive Hold

This feature enables you to place a call on hold so that only you can retrieve it.
While on a call, press
other stations are steady red (in use).

Automatic Hold

This feature enables you to place a call on hold by pressing another
Hold
. Make sure this feature is programmed on your system; if not, existing calls will drop.
While on a call, press another extension button to receive/originate a new call. The accessed line's
LED flashes (in-use). The first call is put on hold and your extension's LED flashes. You can also
switch between calls without having to press

Consultation Hold

1. While on a call, press
2. Dial another line.
3. Transfer the call or return to the held call by pressing its
18
Hold
. Your LCD shows the line on hold. The held Line's LED flashes
Hold
twice. That line's LED flashes green while appearances of the line at
Cnf/Trn
. The call goes on hold.
Line
button.
Hold
.
Line
button.
Strata CTX DKT3000/3500-Series Digital Telephone October 2002
The Basics
Line
button – no need to press