Silent Messaging (Busy Station) - Toshiba CT User Manual

7. Press
8. Press
9. Press .
To receive a notification message
Press
To cancel the message from the telephone that set the message
Press [PDN] and dial
message.

Silent Messaging (Busy Station)

An audible tone and an LCD message can be sent to an LCD station that is busy. The busy
station can return a message to the calling station's LCD. The two stations may continue this
procedure to carry on a "silent" conversation. Soft Keys must be OFF (
sending and receiving stations for this feature to operate.
To send a message to a busy station
1. When you receive a
busy tone, press
2. Enter the message
number.
3. Press
Strata DK Digital Telephone 5/99
.
.
At the destination station, the LCD
displays the originating station
number and the
.
=[DN]
210
+ .
Station message (10~19) and system
message (60~99). The LCD displays
the message. (This assumes the
message is already stored in memory.)
. The destination station beeps four
times and the message displays for 30
seconds, or until you hang up.
LED flashes.
, where XXX is the [PDN] of the telephone that set the
LCD Operation
Messages
MSG NO.?
MODE NO.?
SENT 207M
+ ) at the
OVER TO ST210
MSG NO?
95