Call Waiting - Toshiba CT User Manual

Includes lcd, add-on module, and direct station selection console
Table of Contents

Advertisement

Features

Call Waiting

...or if the station is
busy or does not
answer, hang up
...or to reconnect to
the transferred line
before it is answered,
press the flashing
Call Waiting
You can answer a call that is transferred to your station, even when your station is busy. When
another call is camped onto your station, you hear two camp-on tone beeps and the [DN] or
Line LED flashes red (on-hold).
If a call is sent to your station when busy, and your station does not have a [DN] or
button available to receive the call, two camp-on tone beeps are sent to your telephone. You
must disconnect or transfer the existing call to answer the waiting call.
To answer a waiting call by placing the current call on-hold
Press
36
The Line LED flashes green (on-hold). If you transferred the
call from a [DN], the [DN]'s LED turns off. The CO line or
[DN] camps on to the called station and the called station
receives a warning tone. The camped-on call rings when you
hang up.
The Line LED is a steady red when
the called station answers the
transferred call.
or [DN] +
.
If the call is not answered after a
specified Recall time set in system
programming, camp-on is cancelled
and the transferred call rings back
(when your station or [DN] is idle or
sends two tone bursts if your
telephone is busy).
The LCD shows the CO line number
and the station number [203] where it
was originally transferred.
The existing call is placed on-hold. The camped-on line rings
your station (the Line LED flashes green - incoming call).
NO. 204
CAMP-ON 4
HOLD LINE 2
LN 2 RECALL 203
Strata DK Digital Telephone 5/99

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents