Ringing Line Preference; Signaling; Quick Reference; Making An Internal Call - Toshiba CT User Manual

Features

Quick Reference

Ringing Line Preference

You have Ringing Line Preference, if you can answer a line ringing your station by lifting the
handset or pressing
button associated with the ringing call (flashing LED) to answer the call.
If your telephone does not have Automatic Line Selection, press the flashing [DN] or
first, before using the handset or

Signaling

If you hear a long tone, followed by a caller's voice, you have Voice First Signaling.
Talk in the direction of your telephone
...or answer the call as you normally would using either the handset or
If you hear successive ring tones, you have Tone First Signaling.
Lift the handset or press
You can change to the alternate signaling method when making a call on a call-by-call
Note
basis by pressing
Quick Reference
The following is a quick reference chart for using your telephone's standard features.

Making an Internal Call

1. Lift the handset or
press
...or if you do not
have Automatic Line
Selection, press a
[DN].
2. Dial a directory
number (
3. When finished with
the call, hang up or
press
14
. You do not have Ringing Line Preference, if you have to press the
.
after dialing an internal telephone number.
).
201
.
.
.
NO. 203
Strata DK Digital Telephone 5/99
201