Ricoh FT 4015 Service Manual page 84

20 December 1996
4.2 INSTALLATION PROCEDURE
[A]
[C]
NOTE: 1) Keep the shipping retainers after installing the machine. They will
be reused if the machine will be transported to an another location
in the future.
2) Proper installation of the shipping retainers is required in order to
avoid any transport damage.
3) Do not grasp the sorter by the top cover and stay as shown by [A].

Hold both sides of the sorter as shown by [B]. This is to prevent
damage to the anti-static brush [C].
CAUTION
Unplug the copier power cord before starting the following procedure.
1. Remove the copy tray from the copier.
2. Remove the strips of tape [D] and styrofoam blocks [E].
A657I500.wmf
[D]
3-13
[B]
[E]
SORTER (A657)
[D]
A657I501.wmf