Ricoh FT 4015 Service Manual page 159

20 December 1996
7. Remove the by-pass feed roller [A], as shown.
8. Remove the spring [B].
9. Push the friction pad [C] down and then pull it out.
NOTE: Don't touch the feed roller with bare hands.
- To reinstall -
1. Reinstall the friction pad, the spring, and the by-pass feed roller.
2. Reinstall the sensor ass'y.
CAUTION: 1) Handle the registration sensor with care.
2) Be sure to reconnect the harnesses.
3. Reinstall the paper end cover.
4. Reinstall the by-pass feed table.
[A]
6-33
[C]
A219R542.wmf
PAPER FEED
[B]