Ricoh FT 4015 Service Manual page 112

PROGRAM MODES
Mode No.
Clear All
Memory
99
By-pass Feed
Copy Counter
Display
100
Paper Feed
Tray Copy
Counter
Display
101
DF Original
Counter
Display
106
Total Service
Calls
130
Clears all counters and returns all modes to the
default settings. See the Clear All Memory
Procedure in this section for more details.
Normally, this SP mode should not be
performed.
This SP mode is required only when replacing the
EEPROM, or when the copier malfunctions due to a
* damaged EEPROM.
To clear, enter "1" then press the
key at the same time.
To avoid resetting the counter by mistake, the
counter is reset only when the
key are pressed at the same time.
Displays the total (electrical) copy counter for the
by-pass feed table.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the key to view the last three digits.
Displays the total (electrical) copy counter for the
paper feed tray.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the key to view the last three digits.
Displays the total (electrical) number of originals fed
from the DF.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the key to view the last three digits.
Displays the total number of service call conditions.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
*
The first three digits are displayed in the
magnification indicator.
Press the key to view the last three digits.
Function

key and the

key and the
4-22
20 December 1996
Settings
0: No
1: Yes
*