Ricoh FT 4015 Service Manual page 102

PROGRAM MODES
Mode No.
Output Check
9
Scanner Free
Run
10
All Indicators
On
11
Use to turn on individual electrical components.

Enter the desired number given in the following
table.

Press the key to turn on the electrical
component.
Press the key to turn off the electrical
component.
Component
Electrical Component
No.
Main Motor + Quenching
1 Lamp + Exhaust Fan
Motor (High Speed)
2 Charge Corona
3 Transfer Corona
4 Discharge Plate
Development Bias Voltage
5
6 Erase Lamp
Machine Shut Off
7
Exhaust Fan Motor
8
(High Speed)
9 Optics Cooling Fan
Exposure Lamp + Optics
10
Cooling Fan
11 Toner Supply Motor
Toner Supply Motor
12
(Reverse)
14 Sorter Roller Drive Motor
Sorter Bin Drive Motor
15
(Bin Up)
Sorter Bin Drive Motor
16
(Bin Down)
17 Registration Clutch
18 By-pass Paper Feed Clutch
19 Tray Paper Feed Clutch
21 Relay Roller Clutch
23 Total Counter
24 Key Counter

Start a scanner free run.

Press the key to start the free run.
Press the key to stop the free run.
This mode is performed in accordance with the
selected paper size and magnification ratio.
Turns on all the indicators on the operation panel for
30 seconds. They will turn off automatically after 30
seconds.
To turn off the indicators, press the
Function
Standard Voltage
for Manual ID Level
4.
All LEDs On
Main Switch Relay
Off.
Moves One Bin Up.
Moves One Bin
Down.
Not Used

key.
4-12
20 December 1996
Settings
Note