Network - LG 32SE3D Owner's Manual

Power Indicator
• This function enables you to change the Power Indicator settings.
Setting to On will turn on Power Indicator.
•
Setting to Off will turn off Power Indicator.
•
• Regardless of On or Off settings in Power Indicator, Power Indicator will be turned on for approximately 15
seconds.
Power On/Off History
Display the device's power on/off history.

Network

General
Wired Connection (Ethernet)
• Wired Connection: Connects the monitor to a local area network (LAN) via the LAN port and configures wired
network settings. Only wired network connections are supported. After setting up a physical
connection, the display will automatically connect without any adjustments on most networks.
A small number of networks may require the display settings to be adjusted. For detailed
information, contact your Internet provider or consult your router manual.
Wi-Fi Connection
If you have set your monitor up for a wireless network, you can view and connect to available wireless Internet
networks.
• Add a Hidden Wireless Network: You can add a wireless network by manually typing in its name.
Connect via WPS PBC: Press the button on the wireless router that supports PBC to easily connect to the router.
•
Connect via WPS PIN: Enter the PIN number in the web page of the PIN-supporting wireless router to connect to
•
the router in a simple manner.
• Advanced Wi-Fi Settings: When there is no available wireless network displayed on the screen, you can connect to
NOTE
• When connected to a network that supports IPv6, you can select IPv4 / IPv6 in the wired / wireless network
connection. But, IPv6 connection only supports automatic connection.
Network
the wireless network by entering the network information directly.
13