Network Settings - LG 47LS55A Owner's Manual

34
USER SETTINGS
To Run a sound test
Remote Control (SETTINGS)
Run a sound test to check that sound signals are outputted normally, then solve any problems by
selecting the relevant option on the screen. If there are no problems with the Sound Test, check
connected external devices.

Network Settings

To Set a Signage Name
Remote Control (SETTINGS)
You can set a name for Signage Monitor that will be used on the network by using the on-screen
keyboard.
To Set Your Network
Remote Control (SETTINGS)
Connecting to a wired network: connect the display to a Local Area Network (LAN) via the LAN port
Sound Sound Test
Network Signage Name
Network Wired Connection (Ethernet)
as shown in the following illustration and set up the network settings.
Only wired network connections are supported. After making a
physical connection, a small number of networks may require the
display network settings to be adjusted. For most networks, the
display will automatically make a connection without any adjustments.
For detailed information, contact your Internet provider or consult your
router manual.