LG 32SE3D Owner's Manual page 54

14
3G/4G Connection
Connect to a network via a 3G/4G USB dongle.
LAN Daisy Chain
• LAN Daisy Chain forms a daisy chain of LAN ports so that even if you connect only one monitor set to a network, the
other sets in the daisy chain are connected to the network.
• However, the first monitor set in the daisy chain must be connected to the network through a port that is not used
for the daisy chain connection.
SoftAP
If you set up a SoftAP, you can connect many devices via a Wi-Fi connection without a wireless router and use wireless
Internet.
• You must have an Internet connection.
• The SoftAP and ScreenShare features cannot be used at the same time.
• On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected to the
product.
• SoftAp Access Information
- SSID: A unique identifier necessary to make a wireless Internet connection
- Security key: The security key you enter to connect to the desired wireless network
- Number of connected devices: Shows the number of devices currently connected to your Signage device via a Wi-Fi
connection. Up to 10 devices are supported.
UPnP
Open and block UDP port 1900, which is used for UPnP.
The default setting is On. Setting this feature to Off blocks UDP port 1900, making the UPnP function unavailable.
•
If you set this feature to Off, Sync Mode's "Network" option will be deactivated. When the value for Sync Mode is
•
"Network," the value switches to Off, deactivating the "Network" option.
• If you change the UPnP value, the change will not be applied before a reboot.
• If you set UPnP to Off, you cannot use Group Manager 2.0 properly.
Ping Test
Check your network connection status via Ping Test.