SIMPLINK Setup
•
When the SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage.
Device ID: Set the ID of the device connected via CEC wiring. You can choose a value between All and E.
•
StandBy: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
•
follows:
All
Send Only
Receive Only
Crestron
•
This function enables synchronization with applications provided by Crestron.
•
Server: This menu sets the server's IP address for the network connection with the server (equipment provided by
Crestron).
•
Port (1024~65535): This menu sets the port for the network connection with the server. The default port number
is 41794.
•
IP ID (3-254): This menu sets a unique ID for synchronizing with the application.
Transmission
O
O
X
23
Reception
O
X
O